Research on the intermediate phase of 40CrMnSiB steel shell under different heat treatments

In this study, 40CrMnSiB steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A mid-explosion recovery experiment for the metal cylinder under internal explosive loading was designed, and the wreckage of the casings at the intermediate phase was obtained. The effects of different tempering temperatures on the macroscopic and microscopic fracture characteristics of 40CrMnSiB steel were studied. The influence of tempering temperatures on the fracture characteristic parameters of the recovered wreckage were measured and analyzed, including the circumferential divide size, the thick-ness and the number of the circumferential divisions. The results show that as the tempering temper-ature was increased from 350 to 600 ℃, at first, the degree of fragmentation and the fracture characteristic parameters of the recovered wreckage changed significantly and then became essentially consistent. Scanning electron microscopy analysis revealed flow-like structure characteristics caused by adiabatic shear on different fracture surfaces. At the detonation initiation end of the casing, fracturing was formed by tearing along the crack, which existed a distance from the initiation end and propagated along the axis direction. In contrast, the fracturing near the middle position consists of a plurality of radial shear fracture units. The amount of alloy carbide that was precipitated during the tempering process increased continuously with tempering temperature, leading to an increasing number of spherical carbide particles scattered around the fracture surface.     

Was World War Two a Completely Just War?

ABSTRACT

According to Brian Orend’s binary political model, minimally just states possess a robust set of moral rights, while other states essentially exist in a moral vacuum in which they possess no moral rights. I argue that a more plausible comparative model would allow for a state to acquire (or lose) discrete moral rights as it improves (or damages) its moral record. This would generate a more accurate portrayal of both domestic policy within states and military conflict between states; including, in particular, the role of the Allied forces during World War Two.     

大学物理实验课程教学改革与实践

根据本校大学物理实验课程教学的实际情况，结合对大学物理实验教学的实践与认识，论述了从实验内容、教学方法、考核方式、实验室建设等方面进行教学改革的具体措施和方法，以提高学生的思维能力和创新能力。     

轻集料钢筋混凝土梁受弯性能试验研究

轻集料混凝土应用于港口工程是一个待研究的课题.通过对4根轻集料钢筋混凝土梁和2根普通混凝土梁进行的抗弯对比试验,研究了轻集料钢筋混凝土粱的抗弯力学性能.结果表明,轻集料钢筋混凝土梁在承受正常荷载时,其力学性能与普通混凝土梁相比无明显差异;在破坏时脆性较同等级普通混凝土粱略大,延性略差.但考虑到轻集料混凝土的优点,在实际工程中可代替普通混凝土受弯构件工作.     

浅谈武警士官教育中的“任务驱动式”教学

“任务驱动式”教学是根据士官学员的特殊性及武警部队的声像专业需求，着眼于培养学员应用操作能力，使学员处于秽取参与的学习氛围。在科学发展观的指寻下，充分利用士官学员自身长处，重视实践，采取多样化的考核模式，最终实现学员综合素质全面提高。     

原位反应电火花沉积TiN陶瓷增强相的工艺性能

以TC4钛合金为电极,氮气作为反应气和保护气,在45钢表面原位反应生成含TiN的沉积层。对电压、电容、频率、转速和比沉积时间5个沉积层厚度影响因子,各设4个工艺水平,进行正交试验,研究多项工艺参数同时变化时沉积层厚度的变化规律。结果表明：选用电容为120μF,输出电压145 V,比沉积时间3 min/cm2时可获得综合质量最优的沉积层。电火花反应沉积层与基体形成冶金结合,沉积层均匀致密,厚度约为30～40μm,主要由TiN、FeTi和Fe9.64Ti0.36组成。沉积层的弹性模量为183.614 GPa,而纳米硬度达14.039 GPa,是基体的4倍。结果表明：原位反应电火花沉积可有效改善材料的表面性能。     

作战仿真实验中的实验参量空间分析

针对作战仿真实验中想定空间变量的复杂性,以探索性分析为视角,分析了作战仿真实验中的三类实验参量空间,详细介绍了决策参量空间、能力参量空间、环境参量空间的各种关键性参量,并结合仿真工程实践给出了相应的BNF形式化示例。对于战争复杂系统的仿真分析和实验,按照这三类参量空间对想定变量进行仿真实验设计,可以较好地确定探索性要素,优化其取值组合,并有助于得出实验结果和研究结论,认识和把握其中交织的复杂因果关系。     

超高分子量聚乙烯纤维混凝土的基本力学性能

针对C70等级高强混凝土,设计了4种超高分子量聚乙烯纤维掺量混凝土,通过立方体抗压、劈裂抗拉和四点弯曲抗折试验,分析了纤维掺量对混凝土力学性能的影响。结果表明:超高分子量聚乙烯纤维对混凝土的抗压强度增强作用不明显,但较大提高了混凝土的抗拉强度和抗折强度,且对混凝土有很好的阻裂、增韧效果。在纤维体积掺量为0.3%~0.5%时,劈裂抗拉强度提高25%以上;掺量0.5%时,弯曲抗折强度提高率超过23%。     

C~4ISR系统结构时效性的仿真评估

时效性是评价C4ISR系统结构优劣的重要标准。为了支撑C4ISR系统结构的分析评估与优化设计,提出了系统结构时效性的评估指标体系和指标评估模型,基于Agent建模方法建立了情报获取、情报处理、决策控制和响应执行等系统结构单元的仿真模型,设计并实现了C4ISR系统结构仿真评估软件。开展了三类仿真实验,分析了影响系统结构时效性的因素,比较了不同类型系统结构的优劣,验证了此方法的有效性。     

西北高海拔、高寒地区热媒研究

针对西北高海拔、高寒地区供热速度慢、热效率低等问题,研制出一种新型、高效热媒,热媒在一个大气压下沸点可达到116℃。通过单因素实验及正交实验,优化出了热媒配方;经热媒节能效果现场模拟实验,证明了所研制的热媒能显著改善供热效果;对热媒腐蚀性、风险性进行了分析。该热媒成本低、工艺简单、腐蚀性小、安全性高,具有很好的经济效益和军事效益。